Huawei AR150/200 Series Configuration Manual page 154

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 3 Run:
test-type icmp
The test type is set to ICMP.
Step 4 Run:
destination-address ipv4 ip-address
The destination IP address is configured.
Step 5 (Optional) Perform the following as required to configure other ICMP test parameters ( For
detailed parameter configurations, see the chapter
Parameters
l To configure the VPN instance to be tested, run the vpn-instance vpn-instance-name
l To configure the source interface that sends test packets, run the source-interface interface-
l To configure the source IP address, run the source-address ipv4 ip-address command.
l To configure the size (packet header excluded) of the Echo-Request packet, run the
l To configure the time-to-live (TTL) value, run the ttl number command.
l To configure the type of service (ToS) field in the IP packet header, run the tos value
l To configure padding characters, run the datafill fillstring command.
l To configure the interval for sending the test packets, run the interval seconds interval
l To configure the percentage of the failed NQA test, run the fail-percent percent command.
l To configure the NQA test packets to be sent without searching the routing table, run the
Step 6 Run:
start
The NQA test is started.
Issue 02 (2012-03-30)
):
command.
type interface-number command.
source-address ipv4 ip-address equals the "-a" option in the ping command.
datasize size command.
datasize size equals the "-s" option in the ping command.
ttl number equals the "-h" option in the ping command.
command.
tos equals the "-tos" option in the ping command.
datafill equals the "-p" option in the ping command.
command.
interval seconds equals the "-m" option in the ping command.
sendpacket passroute command.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuring Universal NQA Test
6 NQA Configuration
143