Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
About This Chapter
This chapter describes how to configure the Network Quality Analysis (NQA) to monitor the
network operating status and collect network operation indexes in real time.
6.1 Overview of NQA
This section describes the basic concepts of NQA and its functions.
6.2 Configuring the ICMP Test
This section describes how to configure an Internet Control Message Protocol (ICMP) test to
check the IP network connectivity.
6.3 Configuring the DHCP Test
This section describes how to configure a Dynamic Host Configuration Protocol (DHCP) test
to detect the speed at which a DHCP server that sets up a connection with an NQA agent obtains
the IP address.
6.4 Configuring the FTP Download Test
This section describes how to configure a File Transfer Protocol (FTP) download test to check
the FTP download performance.
6.5 Configuring the FTP Upload Test
This section describes how to configure an FTP upload test to check the FTP upload performance.
6.6 Configuring the HTTP Test
This section describes how to configure a Hypertext Transfer Protocol (HTTP) test to check the
responding speed of the HTTP service in each phase.
6.7 Configuring the DNS Test
This section describes how to configure a Domain Name System (DNS) test to check the DNS
resolution speed.
6.8 Configuring the Traceroute Test
This section describes how to configure a traceroute test to check the connectivity to each hop
on the network.
6.9 Configuring the SNMP Query Test
This section describes how to configure a Simple Network Management Protocol (SNMP) query
test to check the communications between the host and SNMP agent.
Issue 02 (2012-03-30)
6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NQA Configuration
6 NQA Configuration
137
Advertisement
Table of Contents
