Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Figure 1-6 Networking diagram for configuring a device to communicate with an NM station
by using SNMPv3
1.1.1.1/24
NMS2
1.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
l
l
Procedure
Step 1 Configure available routes between the router and the NM stations. Details for the configuration
procedure are not provided here.
Step 2 Enable the SNMP agent.
<Huawei> system-view
[Huawei] snmp-agent
Step 3 Configure the router to run SNMPv3.
Issue 02 (2012-03-30)
NMS1
IP Network
Enable the SNMP agent.
Configure the router to run SNMPv3.
Configure an ACL to allow NMS2 to manage DNS MIB object on the router and configure
data encryption.
Configure the trap function to allow the router to send alarms to NMS2.
Configure the equipment administrator's contact information on the router.
Configure NMS2.
SNMP version
User group name
User name and password
Authentication and encryption algorithms
ACL number
IP address of the NM station
Equipment administrator's contact information
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Eth1/0/0
1.1.2.1/24
Router
1 SNMP Configuration
38
Advertisement
Table of Contents
