Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Equipment administrator's contact information needs to be configured on the router. This allows
the NMS administrator to contact the equipment administrator quickly if a fault occurs.
Figure 1-4 Networking diagram for configuring a device to communicate with an NM station
by using SNMPv1
1.1.1.1/24
1.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure available routes between the router and the NM stations. Details for the configuration
procedure are not provided here.
Step 2 Enable the SNMP agent.
<Huawei> system-view
[Huawei] snmp-agent
Issue 02 (2012-03-30)
NMS1
IP Network
NMS2
Enable the SNMP agent.
Configure the router to run SNMPv1.
Configure an ACL to allow NMS2 to manage DNS MIB object on the router.
Configure the trap function to allow the router to send alarms to NMS2.
Configure the equipment administrator's contact information on the router.
Configure NMS2.
SNMP version
Community name
ACL number
IP address of the NM station
Equipment administrator's contact information
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Eth1/0/0
1.1.2.1/24
Router
1 SNMP Configuration
31
Advertisement
Table of Contents
