Huawei AR150/200 Series Configuration Manual page 232

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure reachable routes between Router A, Router B, and Router C. (The detailed procedure
is not mentioned here.)
Step 2 Configure Router C as the NQA server.
# Configure the IP address and UDP port number monitored by the NQA server.
<RouterC> system-view
[RouterC] nqa-server udpecho 10.2.1.2 9000
Step 3 Configure Router A.
# Enable the NQA client and create an NQA Jitter test.
<RouterA> system-view
[RouterA] nqa test-instance admin jitter
[RouterA-nqa-admin-jitter] test-type jitter
[RouterA-nqa-admin-jitter] destination-address ipv4 10.2.1.2
[RouterA-nqa-admin-jitter] destination-port 9000
Step 4 Start the test.
[RouterA-nqa-admin-jitter] start now
Step 5 View the test results.
[RouterA-nqa-admin-jitter] display nqa results test-instance admin jitter
NQA entry(admin, jitter) :testflag is inactive ,testtype is jitter
1 . Test 1 result
Issue 02 (2012-03-30)
Configure Router A as an NQA client, with Router C being its server.
Configure the monitoring service types and the port number to be monitored on the NQA
server.
Create Jitter tests on the NQA clients.
IP address of the NQA server
UDP port number monitored by the server
The test is finished
SendProbe:60
Completion:success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/4/1/63
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:1
Positive SD Number:15
Positive SD Sum:15
Positive SD Square Sum:15
Min Negative SD:1
Max Negative SD:1
Negative SD Number:16
Negative SD Sum:16
Negative SD Square Sum:16
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:75
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:3
Positive DS Number:14
Positive DS Sum:16
Positive DS Square Sum:22
Min Negative DS:1
Max Negative DS:4
Negative DS Number:12
Negative DS Sum:15
Negative DS Square Sum:27
6 NQA Configuration
221