Example For Configuring The Http Test - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management

6.20.5 Example for Configuring the HTTP Test

This part provides examples for configuring an HTTP test to check the responding speed of the
HTTP service in each phase.
Networking Requirements
As shown in
Figure 6-7 Networking diagram of the HTTP test
Router A
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Issue 02 (2012-03-30)
#
FTP server enable
#
interface Ethernet1/0/0
ip address 10.2.1.2 255.255.255.0
#
aaa
local-user user1 password cipher 3MQ*TZ,O3KCQ=^Q`MAF4<1!!
local-user user1 service-type ftp
local-user user1 ftp-directory flash:
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Figure 6-7, Router A is connected with the HTTP server through a WAN.
Eth1/0/0
10.1.1.1/24
Configure Router A as an NQA client.
Create and perform an HTTP test on Router A to check whether Router A can set up a
connection with the HTTP server and to obtain the time of file transferring between Router
A and the HTTP server.
IP address of the HTTP server
HTTP operation type
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HTTP Server
10.2.1.1/24
IP Network
6 NQA Configuration
209