Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Method
Sending an Inform
message at a
specified time
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cwmp
The CWMP view is displayed.
Step 3 Run:
cwmp acs url url
The ACS's URL to which the CPE connects is specified.
Step 4 The CPE can use the following methods to send Inform messages:
l
1.
2.
l
1.
----End
Issue 02 (2012-03-30)
Advantage
The CPE can initiate
a connection with the
ACS at the specified
time. This method is
flexible.
Sending Inform messages periodically
Run:
cwmp cpe inform interval enable
The CPE is enabled to periodically send Inform messages.
By default, the CPE does not periodically send Inform messages.
Run:
cwmp cpe inform interval
The interval at which a CPE sends Inform messages is set.
By default, a CPE sends an Inform message every 600 seconds.
Sending an Inform message at a specified time
Run:
cwmp cpe inform time time
The time when a CPE sends an Inform message is set.
By default, no time is specified for the CPE to send an Inform message.
NOTE
You can configure either one or both methods.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CWMP Configuration
Disadvantage
The CPE sends an
Inform message only
once.
Applicable
Scenario
A connection
between the CPE and
the ACS needs to be
set up at the specified
time.
100
Advertisement
Table of Contents
