Example For Configuring Nqa To Check Voip Service Jitter - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
----End
Configuration Files
l
l
l

6.20.12 Example for Configuring NQA to Check VoIP Service Jitter

This example shows how to use a UDP jitter test to check the jitter for VoIP services.
Issue 02 (2012-03-30)
Min Delay SD:0
Max Delay SD:2
Delay SD Square Sum:4
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:1
jitter out value:0.0322917
NumberOfOWD:60
OWD SD Sum:2
ICPIF value: 0
TimeStamp unit: ms
Packet Rewrite Ratio: 0%
Packet Disorder Ratio: 0%
Fragment-disorder Ratio: 0%
Configuration file of Router A
#
sysname RouterA
#
interface Ethernet1/0/0
ip address 10.1.1.1 255.255.255.0
#
nqa test-instance admin jitter
test-type jitter
destination-address ipv4 10.2.1.2
destination-port 9000
#
ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
#
return
Configuration file of Router B
#
sysname RouterB
#
interface Ethernet1/0/0
ip address 10.1.1.2 255.255.255.0
#
interface Ethernet2/0/0
ip address 10.2.1.1 255.255.255.0
#
return
Configuration file of Router C
#
sysname RouterC
#
interface Ethernet1/0/0
ip address 10.2.1.2 255.255.255.0
#
nqa-server udpecho 10.2.1.2 9000
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Min Delay DS:0
Max Delay DS:1
Delay DS Square Sum:1
Packet Loss DS:0
Average of Jitter:1
Average of Jitter DS:1
jitter in value:0.0322917
Packet Loss Ratio: 0%
OWD DS Sum:1
MOS-CQ value: 0
Packet Rewrite Number: 0
Packet Disorder Number: 0
Fragment-disorder Number: 0
6 NQA Configuration
222