Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
l
Procedure
Step 1 Enable global LLDP on RouterA and RouterB.
# Configure RouterA.
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA] lldp enable
# Configure RouterB.
<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] lldp enable
Step 2 Configure management addresses for RouterA and RouterB.
# Configure RouterA.
[RouterA] lldp management-address 10.10.10.1
# Configure RouterB.
[RouterB] lldp management-address 10.10.10.2
Step 3 Enable the LLDP trap function on RouterA and RouterB.
# Configure RouterA.
[RouterA] snmp-agent trap enable
# Configure RouterB.
[RouterB] snmp-agent trap enable
Step 4 Verify the configuration.
# Check whether the LLDP function is enabled, management addresses are configured, and the
LLDP trap function is enabled.
l View the configurations on RouterA.
Issue 02 (2012-03-30)
Management address 10.10.10.1 for RouterA and management address 10.10.10.2 for
RouterB
<RouterA> display lldp local
System
information
Chassis
type
:macAddress
Chassis ID
:
00e0-11fc-1710
System name
:RouterA
System description
:Huawei AR200 Huawei Versatile Routing Platform Software
RP (R) software,Version 5.100 (AR200 V200R002C00) Copyright (C) 2000-2011
Huawei
Technologies Co., Ltd
System capabilities
supported
:bridge
System capabilities
enabled
:bridge
LLDP Up time
:2011/06/13
11:40:49
MED system
information
Device class
:Network
Connectivity
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 LLDP Configuration
V
76
Advertisement
Table of Contents
