Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream timeout inactive inactive-interval
The inactive aging time of the original traffic is set.
By default, the inactive aging time of the original traffic is 30s.
----End
7.6.6 (Optional) Configuring the Active Aging Time
The active time indicates the interval from the time the first packet arrives to the current time.
After the traffic in the cache expires, the system ages the traffic in the cache.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream timeout active active-interval
The active aging time is set.
By default, the active aging time is 30 minutes.
----End
7.6.7 Enabling Flexible NetStream on Interfaces
You can collect the statistics on aggregated IPv4 unicast traffic only of the interface enabled
with the NetStream function.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port ip netstream record record-name
The record is applied to the interface.
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
245
Advertisement
Table of Contents
