Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
fragments packets
CRC alignment errors:0
Dropped packet (insufficient resources):1795
Packets received according to length (octets):
64
256-511:3698
2.3 RMON Configuration Examples
This section provides examples for configuring RMON, and illustrates the networking
requirements, configuration roadmap, and configuration notes. You can better understand the
configuration procedures with the help of the configuration flowchart.
2.3.1 Examples for Configuring RMON
Networking Requirements
Ethernet0/0/1 on the Router belongs to a VLAN.
As shown in
to obtain real-time and history statistics of unicast packets on the network.
If the number of unicast packets in the VLAN becomes abnormal, the Router sends a Trap
message to the NMS.
Figure 2-1 Networking diagram of configuring RMON
N M S ta tio n
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Issue 02 (2012-03-30)
:0
:150183
,
65-127
,
512-1023:0
Figure
2-1, it is required that the network connected to Ethernet0/0/1 be monitored
IP
N e tw o rk
Execute the SNMP configuration command in advance to enable sending Trap messages
and configure the community name.
Enable collecting statistics and configure the etherStatsTable.
Configure the historyControlTable.
Configure the eventTable.
Configuring the alarmTable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
, jabbers packets
, collisions
:150183
,
128-255
,
1024-1518:0
E th e rn e t
0 /0 /1
R o u te r
2 RMON Configuration
:0
:0
:1383
P C
P C
V L A N
52
Advertisement
Table of Contents
