Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
7.4.5 (Optional) Configuring the Active Aging Time
The active time indicates the interval from the time the first packet arrives to the current time.
After the traffic in the cache expires, the system ages the traffic in the cache.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream timeout active active-interval
The active aging time is set.
By default, the active aging time is 30 minutes.
----End
7.4.6 Enabling NetStream for Multicast Traffic on an Interface
You can collect the statistics on IPv4 multicast traffic only of the NetStream-enabled interface.
Context
Do as follows on the router on which traffic statistics need to be collected.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ip netstream multicast { inbound | outbound }
NetStream is enabled for multicast traffic on an interface.
By default, NetStream is disabled for incoming and outgoing IPv4 multicast traffic.
NetStream can collect the statistics of incoming and outgoing packets simultaneously and
separately without any interference.
----End
7.4.7 Checking the Configuration
After configuring the IPv4 multicast traffic statistics collection, you can view the configuration.
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
236
Advertisement
Table of Contents
