Huawei AR150/200 Series Configuration Manual page 228

Enterprise routers
Table of Contents

Advertisement

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure reachable routes between Router A, Router B, and Router C. (The detailed procedure
is not mentioned here.)
Step 2 Configure Router C as the NQA server.
# Configure the IP address and port number monitored by the NQA server.
<RouterC> system-view
[RouterC] nqa-server tcpconnect 10.2.1.2 9000
Step 3 Configure Router A.
Enable the NQA client and create a TCP test.
<RouterA> system-view
[RouterA] nqa test-instance admin tcp
[RouterA-nqa-admin-tcp] test-type tcp
[RouterA-nqa-admin-tcp] destination-address ipv4 10.2.1.2
[RouterA-nqa-admin-tcp] destination-port 9000
Step 4 Start the test.
[RouterA-nqa-admin-tcp] start now
Step 5 View the test results.
[RouterA-nqa-admin-tcp] display nqa results test-instance admin tcp
NQA entry(admin, tcp) :testflag is inactive ,testtype is tcp
1 . Test 1 result
----End
Configuration Files
l
Issue 02 (2012-03-30)
Router A functions as an NQA client; Router C functions as an NQA server.
Configure the port number monitored by the NQA server and create an NQA TCP test on
the NQA client.
IP address of the NQA server
TCP port number monitored by the server
The test is finished
Send operation times: 3
Completion:success
Attempts number:0
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:10.2.1.2
Min/Max/Average Completion Time: 46/63/52
Sum/Square-Sum
Completion Time: 156/8294
Last Good Probe Time: 2006-8-5 15:53:17.8
Lost packet ratio: 0 %
Configuration file of Router A
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
217

Advertisement

Table of Contents
loading

Table of Contents