Checking The Configuration - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.6.3 Checking the Configuration

After configuring the HTTP test, you can view the test result.
Prerequisites
The configurations of the HTTP Test function are complete.
Context
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l
l
l
<Huawei> display nqa results
NQA entry(admin, http) :testflag is inactive ,testtype is http
1 . Test 1 result
Issue 02 (2012-03-30)
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
DNSRTT: indicates the time when the DNS sends a query request.
TCPConnectRTT: indicates the time when the TCP connection is established.
TransactionRTT and RTT: indicates the durations of data transmission and HTTP test
respectively.
The test is finished
SendProbe:3
Completion:success
MessageBodyOctetsSum: 411
DNSQueryError number: 0
TcpConnError number : 0
DNSRTT Sum/Min/Max:0/0/0
TransactionRTT Sum/Min/Max: 3/1/1
RTT Sum/Min/Max/Avg: 7/1/5/2
DNSServerTimeout:0 TCPConnectTimeout:0
Lost packet ratio:0%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:3
RTD OverThresholdsnumber: 0
TargetAddress: 100.2.1.200
HTTPError number: 0
System busy operation number:0
TCPConnectRTT Sum/Min/Max: 6/1/4
TransactionTimeout: 0
6 NQA Configuration
157