Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Media policy type
Unknown
Policy
VLAN tagged
Media policy VlanID
Media policy L2 priority :6
Media policy Dscp
Power Type
PoE PSE power source
Port PSE Priority
Port Available power value:2
Run display lldp neighbor brief command to view the brief information about neighbors,
including local interface name, neighbor device name, neighbor interface name, and aging time.
<Huawei> display lldp neighbor brief
Local Intf
Eth0/0/0
3.4 Maintaining LLDP
This section describes how to clear LLDP statistics and monitor LLDP status.
3.4.1 Clearing LLDP Statistics
To clear LLDP statistics, run the following reset command in the user view.
Procedure
l
----End
3.4.2 Monitoring LLDP Status
To view LLDP status, run the following display commands.
Procedure
l
l
l
----End
3.5 Configuration Examples
This section provides LLDP configuration examples.
Issue 02 (2012-03-30)
:Voice
:Defined
:Yes
Neighbor Dev
AR
Run the reset lldp statistics [ interface interface-type interface-number ] command to
clear LLDP statistics.
Run the display lldp local [ interface interface-type interface-number ] command to view
LLDP status in the entire system or on an interface.
Run the display lldp statistics [ interface interface-type interface-number ] command to
view statistics about packets sent and received on an interface.
Run the display lldp neighbor [ interface interface-type interface-number ] command to
view neighbor information of an interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:0
:46
:PSE
:PSE
:Low
Neighbor Intf
Eth0/0/0
3 LLDP Configuration
Exptime
103
74