Checking The Configuration - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cwmp
The CWMP view is displayed.
Step 3 Run:
cwmp acs url url
The ACS URL to which the CPE connects is specified.
Step 4 Run:
cwmp ssl-client { client-root-cert { rootcert-path1 } [ rootcert-path2 ] | ssl-
policy policy-name }
The CPE is configured to validate the certificate from the ACS.
----End

4.3.6 Checking the Configuration

Prerequisites
All the CWMP configurations are complete.
Procedure
l
l
----End
Issue 02 (2012-03-30)
NOTE
Certificate contains personal or an enterprise's information and public key:
l
Public key: The two ends share a public key to encrypt data and verify signatures.
l Private key: Each end has a private key to decrypt data and sign signature.
l Signature: Information containing a signature cannot be modified by anyone except the creator. It
ensures data security and integrity.
NOTE
The ACS URL must be in the HTTPS format.
NOTE
The system time must be correctly set; otherwise, certificate validation may fail. To use a new certificate,
uninstall the existing certificate first.
Before configuring a CPE to authenticate the ACS using an SSL policy, run the ssl policy policy-name
type client command to configure the SSL policy on the CPE.
Run the display cwmp configuration command to check CWMP configurations on the
AR150/200.
Run the display cwmp status to check CWMP status on the AR150/200.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CWMP Configuration
103