Huawei AR150/200 Series Configuration Manual page 62

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Example
Run the display rmon alarm command. If information about the alarm table is displayed, it
means that the configuration succeeds.
<Huawei> display rmon alarm 1
Alarm table 1 owned by Test300 is VALID.
Samples
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Run the display rmon event command. If information about the event table is displayed, it
means that the configuration succeeds.
<Huawei> display rmon event
Event table 1 owned by Test300 is VALID.
Description: null
Will cause log
Event table 2 owned by Test300 is VALID.
Description: forUseofPrialarm.
Will cause snmp-trap when triggered, last triggered at 0days 00h:26m:10s.73th.
Run the display rmon eventlog command. If information about the event logs is displayed, it
means that the configuration succeeds.
<Huawei> display rmon eventlog
Event table 1 owned by Test300 is VALID.
Generates eventLog 1.1 at 0days 00h:39m:30s.05th.
Description: The 1.3.6.1.2.1.16.1.1.1.6.1 defined in alarm table 1,
Run the display rmon history command to display the RMON history.
<Huawei> display rmon history
History control entry 1 owned by Test300 is VALID,
Samples interface
Sampling interval
Last Sampling time
Latest sampled values :
octets
broadcast packets
undersize packets
fragments packets
CRC alignment errors :0
Dropped packet:
Run the display rmon prialarm command. If information about the extended alarm table is
displayed, it means that the configuration succeeds.
<Huawei> display rmon prialarm 1
Prialarm table 1 owned by Test300 is VALID.
Samples delta value
Sampling interval
Rising threshold
Falling threshold
When startup enables
This entry will exist
Latest value
Run the display rmon statistics command to display the RMON statistics.
<Huawei> display rmon statistics
Statistics entry 1 owned by Test300 is VALID.
Interface : Ethernet1/0/0<ifEntry.402653698>
Received
octets
broadcast packets
undersize packets
Issue 02 (2012-03-30)
absolute value
when triggered, last triggered at 0days 00h:24m:10s.34th.
less than or equal to 100 with alarm value 0. Alarm sample type is absolute.
: Ethernet1/0/0<ifEntry.402653698>
: 30(sec) with 10 buckets max
: 0days 00h:09m:43s
:645
:7
:6
:0
:0
:
:142915224 , packets
:11603
:0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 1.3.6.1.2.1.16.1.1.1.6.1 <etherStatsBroadcastPkts.1>
: 30(sec)
: 500(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: 1975
, packets
, multicast packets :0
, oversize packets
, jabbers packets
, collisions
, utilization
: .1.3.6.1.2.1.16.1.1.1.6.1+.1.3.6.1.2.1.16.1.1.1.7.1
: 30(sec)
: 1000(linked with event 2)
: 0(linked with event 2)
: risingOrFallingAlarm
: forever
: 16
, multicast packets:756252
, oversize packets :0
2 RMON Configuration
:7
:0
:0
:0
:0
:1749151
51