Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
ip netstream export host ip-address port-number
The destination address for exporting statistics is configured.
The destination NSC address of the exported statistics can be configured in either the system
view or the NetStream aggregation view. You can configure up to 2 destination addresses to
implement the backup between 2 NSCs.
The priority of the destination NSC address configured in the NetStream aggregation view is
higher than that configured in the system view. After the destination NSC address is successfully
configured,
l Original traffic can only be sent to the destination NSC address configured in the system
l Aggregation traffic is sent to the destination NSC address configured in the NetStream
----End
7.5.5 (Optional) Configuring the Inactive Aging Time
The inactive time indicates the interval between the time the last packet arrives and the current
time. When the inactive time expires, the system ages the traffic immediately.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream aggregation timeout inactive inactive-interval
The inactive aging time of the aggregation traffic is set.
By default, the inactive aging time of the aggregation traffic is 30s.
----End
7.5.6 (Optional) Configuring the Active Aging Time
The active time indicates the interval from the time the first packet arrives to the current time.
After the traffic in the cache expires, the system ages the traffic in the cache.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream aggregation timeout active active-interval
The active aging time of the aggregation traffic is set.
Issue 02 (2012-03-30)
view.
aggregation view.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
240
Advertisement
Table of Contents
