Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
network topology information and configuration conflicts. These requirements can be met by
configuring LLDP on RouterA, RouterB, and RouterC.
The NMS has reachable routes to RouterA, RouterB, and RouterC and SNMP parameters are
set on all devices.
Figure 3-8 Configuring LLDP on the device that has multiple neighbors
RouterA
NMS: Network Management System
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Enable global LLDP on RouterA, RouterB, and RouterC.
# Configure RouterA.
Issue 02 (2012-03-30)
RouterD
RouterE
10.10.10.1
LLDP interface
Enable global LLDP on RouterA, RouterB, and RouterC.
Configure management addresses for RouterA, RouterB, and RouterC.
Management addresses for RouterA, RouterB, and RouterC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NMS
RouterF
LLDPDU
10.10.10.2
10.10.10.3
RouterB
3 LLDP Configuration
RouterC
SNMP packet
LLDPDU packet
81
Advertisement
Table of Contents
