Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
No.
1
2
3
4
5
6
7
4.3.2 Enabling the CWMP Function
The CWMP configurations take effect only after the CWMP function is enabled.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
cwmp
The CWMP view is displayed.
Step 3 Run:
cwmp enable
The CWMP function is enabled.
----End
4.3.3 Configuring CWMP Auto-Connection
To allow the ACS to manage the CPE, set up a connection between the ACS and the CPE.
Context
How a CPE obtains the URL of ACS
To set up a connection with an ACS, the CPE must obtain the URL of the ACS. The
AR150/200 supports three methods to obtain the URL.
Issue 02 (2012-03-30)
Data
URL, user name, and password used by the router to connect to the ACS
user name and password used by the ACS to connect to the router
Name and number of the interface used by the router to communicate with the
ACS
Interval at which the CPE sends Inform messages
Date and time when the CPE sends an Inform message
Number of auto-connection attempts
Close-wait timer of the CPE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CWMP Configuration
98
Advertisement
Table of Contents
