Example For Configuring A Device To Communicate With An Nm Station By Using Snmpv3 - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
<Huawei> display snmp-agent sys-info contact
The contact person for this managed node:
----End
Configuration Files
Configuration file of the router
#
acl number 2001
rule 5 permit source 1.1.1.2 0
rule 6 deny source 1.1.1.1 0
#
interface Ethernet1/0/0
ip address 1.1.2.1 255.255.255.0
#
ospf 1
area 0.0.0.0
network 1.1.2.0 0.0.0.255
#
snmp-agent local-engineid 000007DB7FFFFFFF00001AA7
snmp-agent community write adminnms2 mib-view dnsmib acl 2001
snmp-agent sys-info contact call Operator at 010-12345678
snmp-agent sys-info version v2c
snmp-agent target-host trap-hostname nms2 address 1.1.1.2 udp-port 162 trap-
paramsname trapnms2
snmp-agent target-host trap-paramsname trapnms2 v2c securityname adminnms2
snmp-agent mib-view dnsmib include hwDnsMib
snmp-agent trap enale
snmp-agent trap queue-size 200
snmp-agent trap life 60
snmp-agent
#
return
1.5.3 Example for Configuring a Device to Communicate with an
NM Station by Using SNMPv3
This section provides an example to describe how to configure a device to communicate with
an NM station by using SNMPv3 and how to specify the MIB objects that can be managed by
the NM station.
Networking Requirements
As shown in
across a public network. According to the network planning, NMS2 can manage DNS MIB
object on the router, and NMS1 does not manage the router.
On the router, only the modules that are enabled by default are allowed to send alarms to NMS2.
This prevents an excess of unwanted alarms from being sent to NMS2. Excessive alarms can
make faults location difficult.
The data transmitted between NMS2 and the router needs to be encrypted and the NMS
administrator needs to be authenticated because the data has to travel across the public network.
Equipment administrator's contact information needs to be configured on the router. This allows
the NMS administrator to contact the equipment administrator quickly if a fault occurs.
Issue 02 (2012-03-30)
call Operator at 010-12345678
Figure 1-6, two NM stations (NMS1 and NMS2) and the router are connected
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
37