Huawei AR150/200 Series Configuration Manual page 224

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
l
l
Data Preparation
To complete the Traceroute test, you need to configure the destination IP address to be tested.
Procedure
Step 1 Configure reachable routes between Router A, Router B, and Router C. (The detailed procedure
is not mentioned here.)
Step 2 Create an NQA Traceroute test on Router A and configure the destination IP address to be tested
to 10.2.1.2.
<Router > system-view
[RouterA] nqa test-instance admin trace
[RouterA-nqa-admin-trace] test-type trace
[RouterA-nqa-admin-trace] destination-address ipv4 10.2.1.2
Step 3 Start the test.
[RouterA-nqa-admin-trace] start now
Step 4 View the test results.
# View the test results on Router A.
[RouterA-nqa-admin-trace] display nqa results test-instance admin trace
NQA entry(admin, trace) :testflag is inactive ,testtype is trace
1 . Test 1 result
----End
Configuration Files
l
Issue 02 (2012-03-30)
Configure Router A as an NQA client.
Create and perform the Traceroute on Router A to obtain the statistics about each hop
fromRouter A to Router C.
The test is finished
Completion:success
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Drop operation number:0
Last good path Time:2009-3-28 10:52:39.9
1 . Hop 1
Send operation times: 3
Min/Max/Average Completion Time: 1/1/1
Sum/Square-Sum Completion Time: 3/3
RTD OverThresholds number: 0
Last Good Probe Time: 2009-3-28 10:52:39.9
Destination ip address:10.1.1.2
Lost packet ratio: 0 %
2 . Hop 2
Send operation times: 3
Min/Max/Average Completion Time: 1/1/1
Sum/Square-Sum Completion Time: 3/3
RTD OverThresholds number: 0
Last Good Probe Time: 2009-3-28 10:52:39.9
Destination ip address:10.2.1.2
Lost packet ratio: 0 %
Configuration file of Router A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Attempts number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Receive response times: 3
Receive response times: 3
6 NQA Configuration
213