Checking The Configuration - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
quit
The system view is displayed.
Step 4 Run:
ntp-service in-interface disable
The interface on the router is disabled from receiving NTP packets.
----End

5.2.8 Checking the Configuration

After basic NTP functions are configured, you can view the configuration.
Prerequisites
The configurations of the Basic NTP Functions are complete.
Procedure
l
l
l
----End
Example
Run the display ntp-service status command to view the status of the NTP service.
<Huawei> display ntp-service status
clock status: synchronized
clock stratum: 2
reference clock ID: LOCAL(0)
nominal frequency: 60.0002 Hz
actual frequency: 60.0002 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 10.00 ms
reference time: 15:51:36.259 UTC Apr 25 2010(C6179088.426490A3)
Run the display ntp-service sessions [ verbose ] command to view the status of NTP sessions.
Issue 02 (2012-03-30)
Run the display ntp-service status command to view the status of the NTP service.
Run the display ntp-service sessions [ verbose ] command to view the status of NTP
sessions.
Run the display ntp-service trace command to view the summary information on each
passing NTP server when tracing from the local device to the reference clock source.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NTP Configuration
118