Dns Server - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Figure 6-8 Networking diagram of the DNS test
Router A
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure reachable routes between Router A, the DNS server, and the host to be accessed. (The
detailed procedure is not mentioned here.)
Step 2 Create an NQA DNS test.
<Router> system-view
[RouterA] dns resolve
[RouterA] dns server 10.3.1.1
[RouterA] nqa test-instance admin dns
[RouterA-nqa-admin-dns] test-type dns
[RouterA-nqa-admin-dns] dns-server ipv4 10.3.1.1
[RouterA-nqa-admin-dns] destination-address url server.com
Step 3 Start the test.
[RouterA-nqa-admin-dns] start now
Step 4 View the test results.
[RouterA-nqa-admin-dns] display nqa results test-instance admin dns
NQA entry(admin, dns) :testflag is inactive ,testtype is dns
1 . Test 1 result
Issue 02 (2012-03-30)
Eth1/0/0
10.1.1.1/24
Configure Router A as an NQA client.
Create and perform a DNS test on Router A to check whether Router A can set up a
connection with the DNS server and to obtain the speed of responding an address resolution
request.
IP address of the DNS server
Name of the host to be accessed
The test is finished
Send operation times: 1
Completion:success
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
server.com
10.2.1.1/24
IP Network

DNS Server

10.3.1.1/24
Receive response times: 1
RTD OverThresholds number: 0
6 NQA Configuration
211