Example For Configuring The Dns Test - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Configure the IP address. (The detailed procedure is not mentioned here.)
Step 2 Enable the NQA client and create an NQA HTTP test.
<RouterA> system-view
[RouterA] nqa test-instance admin http
[RouterA-nqa-admin-http] test-type http
[RouterA-nqa-admin-http] destination-address ipv4 10.2.1.1
[RouterA-nqa-admin-http] http-operation get
[RouterA-nqa-admin-http] http-url www.huawei.com
Step 3 Start the test.
[RouterA-nqa-admin-http] start now
Step 4 View the test results.
[RouterA-nqa-admin-http] display nqa results test-instance admin http
NQA entry(admin, http) :testflag is inactive ,testtype is http
Test 1 result
----End
Configuration Files
The configuration file of Router A is as follows:
#
sysname RouterA
#
interface Ethernet1/0/0
ip address 10.1.1.1 255.255.255.0
#
nqa test-instance admin http
test-type http
destination-address ipv4 10.2.1.1
http-url www.huawei.com
#
return

6.20.6 Example for Configuring the DNS Test

This part provides examples for configuring a DNS test to check the DNS resolution speed.
Networking Requirements
As shown in
a domain name server.com.
Issue 02 (2012-03-30)
The test is finished
SendProbe:3
Completion:success
MessageBodyOctetsSum: 411
DNSQueryError number: 0
TcpConnError number : 0
DNSRTT Sum/Min/Max:0/0/0
TransactionRTT Sum/Min/Max: 3/1/1
RTT Sum/Min/Max/Avg: 7/2/3/2
DNSServerTimeout:0 TCPConnectTimeout:0
Lost packet ratio:0%
Figure 6-8, Router A functions as a DNS client to access the host 10.2.1.1/24, using
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:3
RTD OverThresholdsnumber: 0
TargetAddress: 10.2.1.1
HTTPError number: 0
System busy operation number:0
TCPConnectRTT Sum/Min/Max: 4/1/2
TransactionTimeout: 0
6 NQA Configuration
210