Dgps Message Programming - Icom ID-31A Advanced Instructions

Previous view
D GPS message programming
Enter a GPS message of up to 20 characters to be
transmitted with the position data.
Example: Adding "OSAKA suzuki"
Push [MENU]
q
Push D-pad( ) to select the root item (GPS), and
w
then push D-pad(Ent) to go to the next screen.
D-pad
(Ent)
(�)
( MENU > GPS > GPS TX MODE > GPS(DV-G) SET
> GPS Message)
Refer to the menu sequence shown directly above,
e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push .
r
t Push D-pad() to select "Edit" and then push D-
pad(Ent).
The message editing screen appears.
y
Rotate [DIAL] to select the first character.
u
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
Push D-pad() to select the desired modes to Upper
case letters, Lower case letters, Numbers and Symbols.
To enter symbols, select "!"#," and then push D-pad(Ent)
to display the symbol character selection window. And
rotate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
• A space can be selected, even for any input mode se-
lected.
• Push D-pad(") to enter a space to the right of the last
character.
To insert a space to the left of any selected character,
rotate [DIAL] to select a space to insert it.
• Push [CLR]
down [CLR]
after the cursor.
Push D-pad( ") to move the cursor to the second
i
digit.
Repeat steps u and i to enter a group name of up
o
to 20 characters, including spaces.
!0 After entering the name, push D-pad(Ent).
!1 Push [MENU]
.
to change the
to open the input mode
to erase the selected character, or hold
to continuously erase the characters
to exit the Menu screen.
Input mode
selection window
5-17
GPS/GPS-A OPERATION
GPS MESSAGE
screen
In the process of
entering
"OSAKA" and a
space.
5
5