About The Repeater List Default Values; D Opening The Default Repeater List - Icom ID-5100A Full Manual

Previous view
7
D-STAR OPERATION <ADVANCED>

About the repeater list default values

You can check the repeater list default values using the
CS-5100
cloning software
(Icom Cloning Format) file, including the default repeat-
er list from the Icom website.
http://www.icom.co.jp/world/support/download/firm/
index.html
When you open the downloaded ICF file with the CS-
5100, the repeater list default values are displayed on
the screen.
To reset the programmed repeater list to the default,
write the ICF file to the transceiver using the CS-5100*
or copy the ICF file to the SD card*
the transceiver.
* 1 See the CS-5100 instruction manual when using the
CS-5100.
* 2 See Section 9 when using the SD card.

D Opening the default repeater list

Start the CS-5100.
q
• See the CS-5100 instruction manual for how to install the
software.
Click [Open] to open the ICF file.
w
Click the [Repeater list] folder to show the default
e
repeater list.
Click
You can see the
default values of
the repeater list.
, if you download the ICF
1
2 , and then write to
,
When the ICF file is opened on the CS-5100.
7-37
Double-
click
Select