Texas Instruments AM1808 User Manual page 180

AM1808
SPRS653E – FEBRUARY 2010 – REVISED MARCH 2014
Table 6-90. Universal Serial Bus OTG (USB0) Registers (continued)
BYTE ADDRESS ACRONYM
0x01E0 0462 TXFIFOSZ
0x01E0 0463 RXFIFOSZ
0x01E0 0464 TXFIFOADDR
0x01E0 0466 RXFIFOADDR
0x01E0 046C HWVERS
0x01E0 0480 TXFUNCADDR
0x01E0 0482 TXHUBADDR
0x01E0 0483 TXHUBPORT
0x01E0 0484 RXFUNCADDR
0x01E0 0486 RXHUBADDR
0x01E0 0487 RXHUBPORT
0x01E0 0488 TXFUNCADDR
0x01E0 048A TXHUBADDR
0x01E0 048B TXHUBPORT
0x01E0 048C RXFUNCADDR
0x01E0 048E RXHUBADDR
0x01E0 048F RXHUBPORT
0x01E0 0490 TXFUNCADDR
0x01E0 0492 TXHUBADDR
0x01E0 0493 TXHUBPORT
0x01E0 0494 RXFUNCADDR
0x01E0 0496 RXHUBADDR
0x01E0 0497 RXHUBPORT
0x01E0 0498 TXFUNCADDR
0x01E0 049A TXHUBADDR
0x01E0 049B TXHUBPORT
180 Peripheral Information and Electrical Specifications
Transmit Endpoint FIFO Size
(Index register set to select Endpoints 1-4 only)
Receive Endpoint FIFO Size
(Index register set to select Endpoints 1-4 only)
Transmit Endpoint FIFO Address
(Index register set to select Endpoints 1-4 only)
Receive Endpoint FIFO Address
(Index register set to select Endpoints 1-4 only)
Target Endpoint 0 Control Registers, Valid Only in Host Mode
Address of the target function that has to be accessed through the associated Transmit
Endpoint.
Address of the hub that has to be accessed through the associated Transmit Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Transmit Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Address of the target function that has to be accessed through the associated Receive
Endpoint.
Address of the hub that has to be accessed through the associated Receive Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Receive Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Target Endpoint 1 Control Registers, Valid Only in Host Mode
Address of the target function that has to be accessed through the associated Transmit
Endpoint.
Address of the hub that has to be accessed through the associated Transmit Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Transmit Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Address of the target function that has to be accessed through the associated Receive
Endpoint.
Address of the hub that has to be accessed through the associated Receive Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Receive Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Target Endpoint 2 Control Registers, Valid Only in Host Mode
Address of the target function that has to be accessed through the associated Transmit
Endpoint.
Address of the hub that has to be accessed through the associated Transmit Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Transmit Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Address of the target function that has to be accessed through the associated Receive
Endpoint.
Address of the hub that has to be accessed through the associated Receive Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Receive Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Target Endpoint 3 Control Registers, Valid Only in Host Mode
Address of the target function that has to be accessed through the associated Transmit
Endpoint.
Address of the hub that has to be accessed through the associated Transmit Endpoint. This is
used only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Port of the hub that has to be accessed through the associated Transmit Endpoint. This is used
only when full speed or low speed device is connected via a USB2.0 high-speed hub.
Submit Documentation Feedback
Product Folder Links:
REGISTER DESCRIPTION
Hardware Version Register
Copyright © 2010–2014, Texas Instruments Incorporated
AM1808
www.ti.com