Table of Contents
Advertisement
www.ti.com
5.4
Notes on Recommended Power-On Hours (POH)
The information in the section below is provided solely for your convenience and does not extend or
modify the warranty provided under TI's standard terms and conditions for TI semiconductor products.
To avoid significant degradation, the device power-on hours (POH) must be limited to the following:
Silicon
Speed Grade
Revision
A
300 MHz
B/E
300 MHz
B/E
375 MHz
B/E
375 MHz
B/E
456 MHz
B/E
456 MHz
(1) 100,000 POH can be achieved at this temperature condition if the device operation is limited to 345 MHz
Note: Logic functions and parameter values are not assured out of the range specified in the recommended
operating conditions.
The above notations cannot be deemed a warranty or deemed to extend or modify the warranty under
TI's standard terms and conditions for TI semiconductor products.
Copyright © 2010–2014, Texas Instruments Incorporated
Table 5-1. Recommended Power-On Hours
Operating Junction
Temperature (Tj)
0 to 90 °C
0 to 90 °C
0 to 90 °C
-40 to 105 °C
0 to 90 °C
-40 to 90 °C
Submit Documentation Feedback
Product Folder Links:
SPRS653E – FEBRUARY 2010 – REVISED MARCH 2014
Nominal CVDD Voltage (V)
1.2V
1.2V
1.2V
1.2V
1.3V
1.3V
AM1808
AM1808
Power-On Hours [POH]
(hours)
100,000
100,000
100,000
(1)
75,000
100,000
100,000
Specifications
67
Advertisement
Table of Contents
