Dot1X Version-Check - Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches
tx-period: Specify the transmission timeout timer. After the Authenticator sends the
Request/Identity request packet which requests the user name or user name and
password together, the tx-period timer of the Authenticator begins to run. If the
Supplicant does not respond back with authentication reply packet successfully, then
the Authenticator will resend the authentication request packet.
tx-period-value: Specify how long the duration of the transmission timeout timer is. The
value ranges from 10 to 120 in units of second and defaults to 30.
reauth-period: Re-authentication timeout timer. During the time limit set by this timer,
the supplicant device launches 802.1x re-authentication.
reauth-period-value: Period set by the re-authentication timeout timer, ranging from 1 to
86400, in seconds. By default, the value is 3600.
ver-period: Client version request timeout timer. If the supplicant device failed to send
the version response packet within the time set by this timer, then the authenticator
device will resend the version request packet.
ver-period-value: Period set by the version request timeout timer, ranging from 1 to 30,
in seconds. By default, the value is 30.
Description
Using dot1x timer command, you can configure the 802.1x timers. Using undo dot1x
timer command, you can restore the default values.
When it is run, 802.1x enables many timers to control the rational and orderly
interacting of the Supplicant, the Authenticator and the Authenticator Server. This
command can set some of the timers (while other timers cannot be set) to adapt the
interaction process. It could be necessary for some special and hard network
environment. Generally, the user should keep the default values of the timers.
For the related commands, see display dot1x.
Example
# Set the Authentication Server timeout timer is 150s.
[Quidway] dot1x timer server-timeout 150

1.1.15 dot1x version-check

Syntax
dot1x version-check [ interface interface-list ]
undo dot1x version-check [ interface interface-list ]
View
System view/Ethernet port view
Huawei Technologies Proprietary
1-15
Chapter 1 802.1x Configuration Commands