Configuring The Static Ip Mode; Preparation - Huawei SmartAX MT880 User Manual

(5) Click Submit.
(6) Select Basic > DHCP in the navigation tree to display the
DHCP configuration page.
(7) Select DHCP Server in the DHCP configuration page. Click
Submit.
(8) Select Tools > Save & Reboot in the navigation tree.
(9) Select Save in the Save/Reboot page. Click Submit to save
the configuration.
(10) Select Reboot in the Save/Reboot page. Click Submit to
reboot the MT880.
2. Configuring Your Computer
Configure your computer NIC, to make the computer to auto
obtain information, such as the IP address, gateway and DNS.

3.7 Configuring the Static IP Mode

This section mainly introduces how to configure the MT880 in the
static IP mode and how to configure your computer to access the
network through the MT880.

3.7.1 Preparation

Table 3-5 shows the configuration preparation.
Name
PVC mode
PVC operation mode
Default route
VPI/VCI
Encapsulation
Table 3-5 Configuration for the static IP mode
Static IP
Enable
Enable
Provided by the ISP
Provided by the ISP
Configuration
23