Configuring Vsrp Using The Web Management Interface - HP ProCurve 9304M Installation And Configuration Manual

This display shows the following information when you use the aware parameter. For information about the
display when you use the vrid <num> or vlan <vlan-id> parameter, see "Displaying VRID Information" on
page 10-34.
This Field...
VLAN ID
VRID
Last Port

Configuring VSRP Using the Web Management Interface

You can use the Web management interface to configure VSRP.
Enabling and Disabling VSRP
To enable VRRP, do the following:
1. Log on to the device using a valid user name and password for read-write access. The General System
configuration panel is displayed.
2. Click Enable next to VSRP to enable it, or Disable to disable it.
3. Click the Apply button to apply your changes.
4. Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
Configuring VSRP Parameters
To configure VSRP parameters using the Web management interface, do the following:
1. Log on to the device using a valid user name and password for read-write access. The General System
configuration panel is displayed.
2. Click on the plus sign next to Monitor in the tree view to expand the list of configuration options.
3. Click on the plus sign next to VSRP in the tree view to expand the list of configuration options.
4. Click on the Virtual Switch link.
• If virtual switches have been configured for the device, you see a list of virtual routers. Click the Modify
button if you want to make changes to a virtual switch's parameters, of click the Add virtual switch link to
add a VSRP interface.
Table 10.6: CLI Display of VSRP-Aware Information
Displays...
The VLAN that contains the VSRP-aware device's connection with the
VSRP Master and Backups.
The VRID.
The most recent active port connection to the VRID. This is the port
connected to the current Master. If a failover occurs, the VSRP-aware
device changes the port to the port connected to the new Master. The
VSRP-aware device uses this port to send and receive data through
the backed up node.
Configuring Metro Features
10 - 37