Configuring Igmp From The Web Browser Interface - HP ProCurve Switch 212M Management And Configuration Manual

Configuring IGMP from the Web Browser Interface

3. To enable or disable IGMP, click on the drop-down
menu, and click on your selection (On or Off).
Figure 6-17. Configuring IGMP from the Web Browser Interface
Parameter
Multicast Filtering
(IGMP)
Default: Off
IP Multicast (IGMP) Service Features—Multimedia Traffic Control
1. Click Here
2. Click Here
4. Click on Apply Changes
to activate your choice.
Description
Determines whether the switch uses IGMP on a per-port basis to manage
IP Multicast traffic.
When Off, all ports on the switch simply forward IP multicast traffic.
When On, the feature enables each port on the switch to detect IGMP
queries and report packets, and to manage IP multicast traffic.
When you use the web browser Interface to enable Multicast Filtering,
the default operation is for each port in the switch to automatically
forward or drop IGMP traffic, depending on whether there are any IGMP
hosts or multicast routers on the port.
Configuring the Switch
6-35