HP ProCurve 9304M Installation And Configuration Manual page 93

Figure 4.3 TSP allocations for example configuration 1
MP = Management Processor
TSP = T-Flow Switching Processor
MP
The device begins with the highest-weight module, in this case the 8-port Gigabit module in slot 3, and allocates
that module's ports to TSP 1. The device then allocates the module with the second-highest weight, in this case
the 24-port 10/100 module in slot 2, to the next TSP with the lowest allocated weight, which is TSP 2. Finally, the
device allocates the last forwarding module, the 24-port 10/100 module in slot 4, to the next TSP with the lowest
allocated weight, TSP 3.
Example Configuration 2
Slot
1
2
3
4
5
6
7
8
Figure 4.4 shows the TSP allocations for this configuration.
TSP 1
Slot 3 Wt 80
-------------------
Total 80
Table 4.3: Example Configuration 2
Module type
24-port 10/100 24
24-port 10/100 24
8-port Gigabit 80
T-Flow n/a
24-port 10/100 24
8-port Gigabit 80
24-port 10/100 24
24-port 10/100 24
Using the T-Flow Redundant Management Module
TSP 2 TSP 3
Slot 2 Wt 24
Slot 4 Wt 24
-------------------
-------------------
Total 24
Total
Order
Weight
allocated
3
4
1
n/a
5
2
6
7
24
TSP
TSP 3
TSP 3
TSP 1
n/a
TSP 3
TSP 2
TSP 3
TSP 1
4 - 5