HP ProCurve 9304M Installation And Configuration Manual page 188

Installation and Basic Configuration Guide
This Field...
Duplex
Speed
Tag
Priority
7 - 20
Table 7.3: CLI Trunk Group Information (Continued)
Displays...
The mode of the port, which can be one of the following:
• None – The link on the primary trunk port is down.
• Full – The primary port is running in full-duplex.
• Half – The primary port is running in half-duplex.
Note: This field and the following fields apply only to operational trunk
groups.
The speed set for the port. The value can be one of the following:
• None – The link on the primary trunk port is down.
• 10 – The port speed is 10 Mbps.
• 100 – The port speed is 100 Mbps.
• IG – The port speed is 1000 Mbps.
Indicates whether the ports have 802.1q VLAN tagging. The value
can be Yes or No.
Indicates the Quality of Service (QoS) priority of the ports. The
priority can be a value from 0 – 7.