Configuring Basic Features
•
AppleTalk zones
The tables you can configure as well the defaults and valid ranges for each table differ depending on the HP
device you are configuring.
NOTE: If you increase the number of sub-net addresses you can configure on each port to a higher amount, you
might also need to increase the total number of sub-nets that you can configure on the device.
To display and configure the adjustable tables on a device, use one of the following methods.
NOTE: Changing the table size for a parameter reconfigures the device's memory. Whenever you reconfigure
the memory on an HP device, you must save the change to the startup-config file, then reload the software to
place the change into effect.
6 - 45