HP ProCurve 9304M Installation And Configuration Manual page 470

Installation and Basic Configuration Guide
Message Level Message
Notification OSPF virtual intf state changed,
rid <router­id>, area <area­id>,
nbr <ip-addr>, state <ospf-state>
Notification OSPF nbr state changed, rid <router­id>, nbr
addr <ip-addr>, nbr rid <nbr-router-Id>, state
<ospf-state>
A - 18
Table A.2: HP Syslog Messages (Continued)
Explanation
Indicates that the state of an OSPF virtual
routing interface has changed.
The <router­id> is the router ID of the router
the interface is on.
The <area­id> is the area the interface is in.
The <ip-addr> is the IP address of the OSPF
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
Indicates that the state of an OSPF neighbor
has changed.
The <router­id> is the router ID of the HP
device.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• attempt
• initializing
• 2-way
• exchange start
• exchange
• loading
• full
• unknown