Obtaining A System Image From An Ftp/Tftp Server; Configuring The Management Ethernet Interface - HP 6125XLG Configuration Manual

Task
Permanently delete a
file.
Delete a folder.
Format a storage
medium.

Obtaining a system image from an FTP/TFTP server

If the required system image is saved on an FTP or TFTP server, configure the management Ethernet
interface and obtain the system image as described in the following sections.
The version of the system image must match that of the boot image. Before obtaining a system image,
check the version of the boot image by using the display version command and the version of the system
image by reading the release notes.

Configuring the management Ethernet interface

To use FTP, TFTP, SSH, and Telnet services in emergency shell mode, you must configure an IP address for
the management Ethernet interface and activate the port at first. If the servers are on a different network,
you must also specify a gateway for the management Ethernet interface.
To configure the management Ethernet interface on an IPv4 network:
Step
1. Enter system view.
2. Enter management
Ethernet interface view.
3. Assign an IPv4 address
to the port.
4. Specify an IPv4 gateway
for the port.
5. Activate the port.
6. Return to system view.
To configure the management Ethernet interface on an IPv6 network:
Step
1. Enter system view.
2. Enter management
Ethernet interface view.
Command
delete file-url
rmdir directory
format device
Command
system-view
interface m-eth0
ip address ip-address { mask-length | mask }
ip gateway ip-address
undo shutdown
quit
Command
system-view
interface m-eth0
114
Remarks
N/A
To delete a folder, first delete all files and child folders
in the folder.
N/A
Remarks
N/A
N/A
By default, the management
Ethernet interface has no IPv4
address.
By default, the management
Ethernet interface has no IPv4
gateway configured.
By default, the management
Ethernet interface is active.
N/A
Remarks
N/A
N/A