HP ProCurve 9304M Installation And Configuration Manual page 243

Routing switches

Hide thumbs Also See for ProCurve 9304M:

Table of Contents

Synced and Agree – When all the ports on the bridge assert their synced signals, the new Root port asserts

its own synced signal and sends an RST BPDU to Port4/Routing Switch 60 that contains an agreed flag

(Figure 8.11). The Root port also moves into a forwarding state.

Rerooted, Synced, and Agreed

Routing Switch 200

Routing Switch 300

The old Root port on Routing Switch 200 becomes an Alternate Port (Figure 8.13). Other ports on that bridge are

elected to appropriate roles.

The Designated port on Routing Switch 60 goes into a forwarding state once it receives the RST BPDU with the

agreed flag.

Configuring Spanning Tree Protocol (STP) and Advanced STP Features

Routing Switch 100

Indicates a signal

Designated port

Routing Switch 400

Routing Switch 60

Chapters

Table of Contents