4.
Click on the Virtual Switch link to display the VSRP Virtual Switch Statistics Display panel.
The panel shows the following information:
Table 10.7: Web Management Interface Display of VSRP Statistics
This Field...
VLAN ID
VRId
State
Receive Pkts Drop
Receive Mismatch
Receive Priority Zero from Master
Receive Higher Priority
Transition Count
To clear the statistics for VSRP, click the Clear button on the display panel.
Displays...
ID of the VLAN used by the virtual switch.
The VRID for the virtual switch.
Current state of the port. It can be:
•
Initialize
•
Master
•
Backup
Number of packets addressed to the VRID that were dropped.
Packets are divided into the following categories:
•
ARP packets
•
IP packets
Number of packets that did not match the configured values of the
following:
•
Port – receiving interface
•
IP – IP addresses
•
Hello – Hello interval
Number of times the current Master has resigned
The number of VRRPE packets received by the interface that had a
higher backup priority for the VRID than this device's backup priority
for the VRID.
The number of times this device has changed the state of its VRID:
•
Master – transition from Backup to Master
•
Backup – transition Master to Backup
Configuring Metro Features
10 - 41