HP ProCurve 9304M Installation And Configuration Manual page 220

Routing switches
Hide thumbs Also See for ProCurve 9304M:
Table of Contents

Advertisement

Installation and Basic Configuration Guide
USING THE WEB MANAGEMENT INTERFACE
You cannot display this information using the Web management interface.
Displaying the STP State of a Port-Based VLAN
When you display information for a port-based VLAN, that information includes the STP state of the VLAN. Use
either of the following methods to display port-based VLAN information.
USING THE CLI
To display information for a port-based VLAN, enter a command such as the following at any level of the CLI. The
STP state is shown in bold type in this example.
HP9300(config)# show vlans
Total PORT-VLAN entries: 2
Maximum PORT-VLAN entries: 16
legend: [S=Slot]
PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree On
Untagged Ports: (S3)
Untagged Ports: (S3) 17 18 19 20 21 22 23 24
Untagged Ports: (S4)
Untagged Ports: (S4) 18 19 20 21 22 23 24
Tagged Ports: None
Uplink Ports: None
PORT-VLAN 2, Name greenwell, Priority level0, Spanning tree Off
Untagged Ports: (S1)
Untagged Ports: (S4)
Tagged Ports: None
Uplink Ports: None
Syntax: show vlans [<vlan-id> | ethernet <portnum>]
The <vlan-id> parameter specifies a VLAN for which you want to display the configuration information.
The ethernet <portnum> parameter specifies a port. If you use this parameter, the command lists all the VLAN
memberships for the port.
USING THE WEB MANAGEMENT INTERFACE
To display STP information for a specific VLAN:
1. Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2. Click on the plus sign next to Configure in the tree view.
3. Click on the plus sign next to VLAN in the tree view
4. Select the Port link to display configuration information for the device's port-based VLANs. The STP state is
shown in the STP column.
Displaying Detailed STP Information for Each Interface
To display detailed STP information for individual ports, use the following CLI method.
8 - 14
1
2
3
4
5
6
7
2
3
4
5
6
7
8
1
2
3
4
5
6
7
1
8
9 10 11 12 13 14 15 16
9 10 11 12 13 14 15 16 17
8

Advertisement

Table of Contents
loading

Table of Contents