This chapter outlines the physical installation and network connection for the HP 9300 series Routing Switches.
WARNING: The procedures in this manual are for qualified personnel.
Unpacking a System
To unpack a system, refer to the printed Quick Start Guide shipped with your Routing Switch.
Package Contents
For a list of included parts, please refer to the Read Me First document shipped with your HP device.
General Requirements
To manage a Routing Switch, you need the following items for serial connection to the device:
•
A management station, such as a PC running a terminal emulation application.
•
A straight-through EIA/TIA DB-9 serial cable (M/F), which is provided with your HP Routing Switch.
Use the serial connection to perform basic configuration tasks including assigning an IP address and network
mask to the system. This information is required for managing the system using the Web management interface
or using the CLI through Telnet.
9304M Exceeds 40 lbs. (18.1 kg)
9308M Exceeds 55 lbs. (24.9 kg)
9315M Exceeds 80 lbs. (35 kg) without modules and power
supplies installed. To avoid personal injury, reduce weight
of chassis by removing all modules and power supplies
from chassis prior to lifting or moving.
When handling, two or more people are required.
Chapter 2
Installation
2 - 1