HP ProCurve 9304M Installation And Configuration Manual page 4

Copyright 2000, 2003 Hewlett-Packard Company,
LP. The information contained herein is subject
to change without notice.
Publication number
5990-6028
September 2003
Applicable Products
HP ProCurve 9304M (J4139A)
HP ProCurve 9308M (J4138A)
HP ProCurve 9315M (J4874A)
Trademark Credits
®
Microsoft , Windows
registered trademarks of Microsoft Corporation.
®
Adobe and Acrobat
Systems Incorporated.
Disclaimer
The information contained in this document is
subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO
WARRANTY OF ANY KIND WITH REGARD TO
THIS MATERIAL, INCLUDING BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Hewlett-Packard shall
not be liable for errors contained herein or for
incidental or consequential damages in connection
with the furnishing, performance or use of this
material.
The only warranties for HP products and services
are set forth in the express Warranty statements
accompanying such products and services. Nothing
herein should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained
herein.
Hewlett-Packard assumes no responsibility for the
use or reliability of its software on equipment that is
not furnished by Hewlett-Packard.
Warranty
See the Customer Support and Warranty booklet
included with the product.
A copy of the specific warranty terms applicable to
your Hewlett-Packard product and replacement
parts can be obtained from your HP Sales and
Service Office or authorized dealer.
ii
® ®
, and Windows NT are U.S.
®
are trademarks of Adobe
Safety Considerations
Prior to the installation and use of this product,
review all safety markings and instructions.
Instruction Manual Symbol.
If the product is marked with the above symbol, refer
to the product manual to protect the product from
damage.
WARNING Denotes a hazard that can cause injury.
CAUTION Denotes a hazard that can damage
equipment or data.
Do not proceed beyond a WARNING or CAUTION
notice until you have understood the hazard and
have taken appropriate precautions.
Use of control, adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Grounding
This product provides a protective earthing terminal.
There must be an uninterrupted safety earth ground
from the main power source to the product's input
wiring terminals, power cord or supplied power cord
set. Whenever it is likely that the protection has
been impaired, disconnect the power cord until the
ground has been restored.
If your LAN covers an area served by more than one
power distribution system, be sure their safety
grounds are securely interconnected.
LAN cables may occasionally be subject to
hazardous transient voltages (such as lightning or
disturbances in the electrical utilities power grid).
Handle exposed metal components of the network
with caution.
For more safety information, see "Safety and EMC
Regulatory Statements", beginning on page xvii and
the Quick Start Guide for your HP 9300M Routing
Switch product.
Servicing
There are no user-serviceable parts inside the user­
installable modules comprising the product. Any
servicing, adjustment, maintenance or repair must
be performed only by service-trained personnel.