HP ProCurve 9304M Installation And Configuration Manual page 431

To display detailed information for the neighbors, enter the following command:
HP9300# show fdp neighbors detail
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 150 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
To display information about a neighbor attached to a specific port, enter a command such as the following:
HP9300# show fdp neighbors ethernet 1/1
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 127 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Displaying CDP Entries
To display CDP entries for all neighbors, enter the following command:
HP9300# show fdp entry *
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 124 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Syntax: show fdp entry * | <device-id>
Enabling the FDP and Reading Cisco Discovery Protocol (CDP) Packets
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
RELEASE SOFTWARE
RELEASE SOFTWARE
RELEASE SOFTWARE
13 - 7