HP ProCurve 9304M Installation And Configuration Manual page 467

Message Level Message
Warning Locked address violation at interface
e<portnum>, address <mac-address>
Warning NTP server <ip-addr> failed to respond
Warning Dup IP <ip-addr> detected, sent from MAC
<mac-addr> interface <portnum>
Warning mac filter group denied packets on port
<portnum> src macaddr <mac-addr>,
<num> packets
Table A.2: HP Syslog Messages (Continued)
Explanation
Indicates that a port on which you have
configured a lock-address filter received a
packet that was dropped because the
packet's source MAC address did not match
an address learned by the port before the
lock took effect.
The e<portnum> is the port number.
The <mac-address> is the MAC address that
was denied by the address lock.
Assuming that you configured the port to
learn only the addresses that have valid
access to the port, this message indicates a
security violation.
Indicates that a Simple Network Time
Protocol (SNTP) server did not respond to
the device's query for the current time.
The <ip-addr> indicates the IP address of
the SNTP server.
Indicates that the HP device received a
packet from another device on the network
with an IP address that is also configured on
the HP device.
The <ip-addr> is the duplicate IP address.
The <mac-addr> is the MAC address of the
device with the duplicate IP address.
The <portnum> is the HP port that received
the packet with the duplicate IP address.
The address is the packet's source IP
address.
Indicates that a Layer 2 MAC filter group
configured on a port has denied packets.
The <portnum> is the port on which the
packets were denied.
The <mac-addr> is the source MAC address
of the denied packets.
The <num> indicates how many packets
matching the values above were dropped
during the five-minute interval represented
by the log entry.
Using Syslog
A - 15