Clearing Cdp Information - HP ProCurve 9304M Installation And Configuration Manual

Installation and Basic Configuration Guide
To display CDP entries for a specific device, specify the device ID. Here is an example.
HP9300# show fdp entry Router1
Device ID: Router1
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 156 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Displaying CDP Statistics
To display CDP packet statistics, enter the following command:
HP9300# show fdp traffic
CDP counters:
Total packets output: 0, Input: 3
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Fragmented: 0
Syntax: show fdp traffic

Clearing CDP Information

You can clear the following CDP information:
• Cisco Neighbor information
• CDP statistics
To clear the Cisco neighbor information, enter the following command:
HP9300# clear fdp table
Syntax: clear fdp table
To clear CDP statistics, enter the following command:
HP9300# clear fdp counters
Syntax: clear fdp counters
13 - 8
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
RELEASE SOFTWARE