Connectors - HP ProCurve 9304M Installation And Configuration Manual

Installation and Basic Configuration Guide

Connectors

• 10/100BaseTX ports come with RJ45 jacks for standard unshielded twisted pair (UTP/Category 5) cable
connections.
• 100BaseFX ports come equipped with MT-RJ connectors.
• 1000BaseSX ports come equipped with SC connectors.
• 1000BaseLX ports come equipped with SC connectors.
• 1000BaseT ports come equipped with RJ-45 connectors.
Figure 2.9 Pin assignment and signalling for 10/100BaseTX and 1000BaseT ports
Pin Assignment
8
1
Cable Length
• 1000BaseT: Cable length should not exceed 100 meters.
• 100BaseTX: Cable length should not exceed 100 meters.
• 100BaseFX: Cable length should not exceed 2 kilometers.
• 1000BaseSX: Cable length should not exceed 550 meters when operating with multi-mode cabling.
• 1000BaseLX:
Cable length of 2 – 440 meters is supported on 62.5 µm multi-mode fiber (MMF) cabling.
•
Cable length of 2 – 550 meters is supported on 50 µm multi-mode fiber (MMF) cabling.
•
Cable length of 2 – 5000 meters is supported on 9 µm single-mode fiber (SMF) cabling.
•
1000BaseSX
2 - 22
10BaseT
Pin Number MDI-X ports
1 RD+
2 RD­
3 TD+
1
4 Not used
5 Not used
6 TD-
8
7
Not used
8
Not used
Table 2.3: Cable length summary table
Fiber Type Core
Diameter
(microns)
MMF 62.5
MMF 62.5
MMF 50
MMF 50
100BaseTX and 1000BaseT
Pin Number MDI-X ports
1 RD+
2 RD­
3 TD+
4 CMT
5 CMT
6 TD­
7
CMT
8
CMT
Modal Minimum
Bandwidth Range
(MHz/km) (meters)
160 a
2 – 200
200 b
2 – 275
400 2 – 500
500 c
2 – 550