HP ProCurve 9304M Installation And Configuration Manual page 395

4. Click on the plus sign next to VLAN in the tree view to expand the list of VLAN option links.
5. Click on the Port link.
• If the device does not have any port-based VLANs, the Port VLAN configuration panel is displayed, as
shown in the following example.
• If at least one port-based VLAN is already configured and you are adding a new one, click on the Add
Port VLAN link to display the Port VLAN configuration panel, as shown in the following example.
• If you are modifying an existing port-based VLAN, click on the Modify button to the right of the row
describing the VLAN to display the Port VLAN configuration panel, as shown in the following example.
6. Enter the VLAN ID and optionally the name.
7. If you want to assign the VLAN to a different Quality of Service (QoS) priority, select the priority from the QoS
field's pulldown menu. For more information, see the "Configuring Quality of Service" chapter in the
Advanced Configuration and Management Guide .
8. Select Enable or Disable next to Spanning Tree to enable or disable the feature on this VLAN.
9. Select the virtual routing interface (router interface) if applicable.
10. Click the Select Port Members button to display the following panel.
11. Select the ports you are placing in the VLAN. To select a row, click on the checkbox next to the row number,
then click on the Select Row button.
Configuring Virtual LANs (VLANs)
11 - 57