HP ProCurve 9304M Installation And Configuration Manual page 204

Installation and Basic Configuration Guide
Table 7.7: CLI Display of Link Aggregation Information (Continued)
This Field...
Syn
Col
Dis
Def
Exp
7 - 36
Displays...
Indicates the synchronization state of the port. The state can be one
of the following:
• No – The port is out of sync with the remote port. The port does
not understand the status of the LACPDU process and is not
prepared to enter a trunk link.
• Syn – The port is in sync with the remote port. The port
understands the status of the LACPDU message exchange
process, and therefore knows the trunk group to which it belongs,
the link aggregation state of the remote port, and so on.
Indicates the collection state of the port, which determines whether
the port is ready to send traffic over the trunk link.
• Col – The port is ready to send traffic over the trunk link.
• No – The port is not ready to send traffic over the trunk link.
Indicates the distribution state of the port, which determines whether
the port is ready to receive traffic over the trunk link.
• Dis – The port is ready to receive traffic over the trunk link.
• No – The port is not ready to receive traffic over the trunk link.
Indicates whether the port is using default link aggregation values.
The port uses default values if it has not received link aggregation
information through LACP from the port at the remote end of the link.
This field can have one of the following values:
• Def – The port has not received link aggregation values from the
port at the other end of the link and is therefore using its default
link aggregation LACP settings.
• No – The port has received link aggregation information from the
port at the other end of the link and is using the settings
negotiated with that port.
Indicates whether the negotiated link aggregation settings have
expired. The settings expire if the port does not receive an LACPDU
message from the port at the other end of the link before the message
timer expires. This field can have one of the following values:
• Exp – The link aggregation settings this port negotiated with the
port at the other end of the link have expired. The port is now
using its default link aggregation settings.
• No – The link aggregation values that this port negotiated with the
port at the other end of the link have not expired, so the port is
still using the negotiated settings.