HP ProCurve 9304M Installation And Configuration Manual page 62

Installation and Basic Configuration Guide
you are connecting to this session
2 seconds in idle
Telnet connections (inbound):
1 established, client ip address 192.168.9.37
27 seconds in idle
Telnet connection (outbound):
SSH connections:
Syntax: <show-command> | exclude <regular-expression>
Displaying Lines Starting with a Specified String
The following command filters the output of the show who command so it displays output starting with the first line
that contains the word "SSH". This command can be used to display information about SSH connections to the
HP device.
HP9300# show who | begin SSH
SSH connections:
1 established, client ip address 192.168.9.210
7 seconds in idle
2 closed
3 closed
4 closed
5 closed
Syntax: <show-command> | begin <regular-expression>
Searching and Filtering Output at the --More-- Prompt
The --More-- prompt is displayed when output extends beyond a single page. From this prompt, you can press
the Space bar to display the next page, the Return or Enter key to display the next line, or Ctrl-C or Q to cancel the
display. In addition, you can search and filter output from this prompt. For example:
HP9300# ?
append
appletalk-ping
attrib
boot
cd
chdir
clear
clock
configure
copy
debug
delete
dir
disable
enable
erase
exit
fastboot
format
gignpa
hd
kill
--More--, next page: Space, next line: Return key, quit: Control-c
At the --More-- prompt, you can press the forward slash key ( / ) and then enter a search string. The HP device
displays output starting from the first line that contains the search string, similar to the begin option for show
commands. For example:
--More--, next page: Space, next line: Return key, quit: Control-c
2 - 28
Append one file to another
Ping AppleTalk node
Change flash card file attribute
Boot system from bootp/tftp server/flash image
Change flash card working slot or current directory
Change flash card working slot or current directory
Clear table/statistics/keys
Set clock
Enter configuration mode
Copy between flash, flash card, tftp, config/code
Enable debugging functions (see also 'undebug')
Delete flash card files
List flash card files
Disable a module before removing it
Enable a disabled module
Erase image/configuration from flash
Exit Privileged mode
Select fast-reload option
Format flash card
Gigabit processor commands
Display hex dump of flash card file
Kill active CLI session